Couplings and drives blocks represent power transmission elements and systems such as springs, dampers, pulleys, and drives. To model the dynamic transfer of torques and motions, connect these blocks together just as you would assemble a physical driveline system.
|Belt Drive||Power transmission system with taut belt connecting two pulleys|
|Belt Pulley||Power transmission element with frictional belt wrapped around pulley circumference|
|Chain Drive||Power transmission system with chain and two sprockets|
|Flexible Shaft||Shaft with torsional and bending compliance|
|Rod||Axially flexible bar or cable|
|Rope||Physical connection that enables tension transfer|
|Rope Drum||Power transmission system with tightly wound rope around cylindrical drum|
|Shock Absorber||Mechanism for damping translational vibrations|
|Torque Converter||Viscous fluid coupling between rotating driveline shafts|
|Torsional Spring-Damper||Rotational spring and damper coupling, with Coulomb friction, locking, and hard stops|
|Universal Joint||Rotational coupling between two driveline shafts|
|Variable Ratio Transmission||Dynamic gearbox with variable and controllable gear ratio, transmission compliance, and friction losses|
|Air Spring||Sealed translational air spring|
|Nonlinear Rotational Damper||Rotational damper based on polynomial or table lookup parameterizations|
|Nonlinear Rotational Spring||Torsional spring based on polynomial or table lookup parameterizations|
|Nonlinear Translational Damper||Translational damper based on polynomial or table lookup parameterizations|
|Nonlinear Translational Spring||Translational spring based on polynomial or table lookup parameterizations|
|Rotational Damper||Faultable linear rotational damper|
|Translational Damper||Faultable linear translational damper|
|Variable Rotational Damper||Rotational damper with variable damping coefficient|
|Variable Rotational Spring||Rotational spring with variable spring stiffness|
|Variable Translational Damper||Translational viscous damper with variable damping coefficient|
|Variable Translational Spring||Translational spring with variable spring stiffness|
Model a time-varying inertia using a variable ratio transmission.
Model damping due to viscous friction.
Model random noise in a drivetrain.
Model faults that disturb drivetrains.
This example shows two flexible aluminum shafts modeled using a lumped parameter approach.
This example shows two flexible shafts that have torsional and transverse flexibility.
This example shows basic operations of a torque converter including lock-up clutch mechanism.
Learn about belt direction and using ropes and inertias in pulley networks.
Identify and eliminate issues that prevent your model from simulating to completion.
Learn how to solve initialization and motion issues in pulley networks.