Windows Real-Time Target - Serious Lag
1 view (last 30 days)
I experience serious lag-behind of a minimalistic Simulink model containing only a Real-Time Synchronization Block. As far as I can tell the problem only occurs on our Windows 7 SP1, x64 machine with i7 and 8GB of RAM. Another machine (Win 7, x64, 8GB RAM, i5) does not show this problem.
The model is configured for a 0.1sec sample time, which should be well within the capabilities of the hardware.
The Windows Real-Time Kernel reports version 4.4.0, shipped with MATLAB 2014a.
Sandip Kumar on 9 Oct 2014
This is something not expected. One possible cause for the slow performance would be the 'CPU Power Management' options in BIOS, which interferes with the real-time kernel hence leading to slow performance.
Disable the power management options specific to your CPU in BIOS options and re-run the Simulink model with the block.
Thanks, Sandip, MathWorks
Suneesh on 10 Oct 2014
1. Are you using the Synchronization block and running the model in Normal mode? Perhaps you could try the external mode and see if you notice the lag:
2. When you enable "Show missed ticks port" does it indicate any missed ticks?