Can I display the simulink scope in a GUI?

I'm designing a GUI that calculate PID parameters, this GUI passes the Kp, Ki, Kd parameters to PID Controller on simulink and then simulate it. I'd like to display the scope of simulation (scope block) in a GUI window. How could I do it?

Answer 1

[TAB]

Log your data coming in the simulink scope to base workspace and plot the data in your gui after simulation.

To enable the scope data logging double click on scope, go to "Scope parameters --> History" and select "Save data to workspace". Structure with time is the best suitable format for data logging.

Now after simulation, scope data will be save in the base workspace.

To plot the data

plot(ScopeData.time,ScopeData.signals.values)

[Gustavo Amorim]

Thanks for answering TAB, in this case I'll add an axes to my GUI and use

plot(ScopeData.time,ScopeData.signals.values) as a function callback, right?

[TAB]

You can use a button to plot the data after simulation. In the button's callback you can use the plot command.

Just for check, after the simulation, call plot command from your workspace. It opens a new figure with graph plotted on it.

[Edgar Ahh]

I need see it on real -time this graph in GUI. How I can do it?

Answer 2

[Craig]

I've made a similar script for optimising parameters in a Simulink model. If one uses the sim(model) in the GUI's script, by default this returns some variable yout of simulation results, the first row being timestep - as you probably know.

Then one could use setappdata and getappdata to transfer the data between callbacks.

You'll need a Axes window in the GUI (easiest to do in GUIDE). In r2007b to get the data to plot I needed to add variables to the GUI handle. For me

handles.variabletoplot = variabletoplot

seemed to work but I'll admit my understanding is fuzzy on this. You can use

axes(handles.axesIwanttoplot)

to set the 'current' GUI axes handle for any succeeding plot commands, such as :

plot(handles.axes3,handles.x,handles.y);

[Gustavo Amorim]

Hey Craig, thanks for answering, I tried to do what you said, but nothing happened, the Axes window didn't updated with the scope data. I used:

handles.ScopeData = ScopeData;

axes(handles.ScopeData)

Is that right?

[Craig]

the second line should be referring to an axes handle e.g. axes3

[Emanuel]

Hello, I did everything you said, and I have a question. How do you extract ScopeData from the scope (i know the thing with 'save to workspace') since the workspace between GUI and the one that Simulink uses are different? I get the error: Unknown ScopeData.time and ScopeData.signals.values. Please Help!