File Exchange

image thumbnail

Lateral Vehicle Dynamics_Camber Racing_Roni_Vahan16

version 1.0.0.0 (52.9 KB) by Roni Deb
Lateral Vehicle Dynamics Model

23 Downloads

Updated 07 Jul 2016

View License

Lateral Vehicle Dynamics helps to simulate the Yawing Characteristics in a vehicle using dynamic load transfer equations.

Comments and Ratings (10)

wenquan hao

simiss

thanks

First to Roni, many thanks to you, good work!!

Regarding the following issue:
"Selected signal 'signal1 (signal 1)' in the Bus Selector block 'vahan_16/LATERAL DYNAMICS/ FRONT LATERAL DYNAMICS/Bus Selector' cannot be found in the input bus signal."

You need to double click the "Bus Selector" block. Then mark all signals listed in the box "Selected Signals" and remove all of them. After that, mark all signals listed in the box "Signals in the bus" and click the Select>> button. Repeat these actions for all Bus Selecter blocks you receive error messages from. Now the model should run properly.

Also these errors when running:
Output port 1 of 'vahan_16/LATERAL DYNAMICS/YAW MOMENT' is not connected.
Component:Simulink | Category:Block warning
Output port 2 of 'vahan_16/LATERAL DYNAMICS/YAW MOMENT' is not connected.
Component:Simulink | Category:Block warning
Selected signal 'signal1 (signal 1)' in the Bus Selector block 'vahan_16/LATERAL DYNAMICS/ FRONT LATERAL DYNAMICS/Bus Selector' cannot be found in the input bus signal.

Getting the following error, anyone have any ideas?
Thanks

Error evaluating 'PreLoadFcn' callback of block_diagram 'vahan_16'.
Callback string is 'diff_cp = xlsread ('Diff_CP');
breakpoints1 = diff_cp (:,1);
breakpoints2 = diff_cp (:,2);
table_data = diff_cp (1:end,2:end);'
Caused by:
XLSREAD unable to open file 'Diff_CP'.
File 'Diff_CP' not found.

Thank you very much!!!

Soon Hao Ye

Thanks Roni!

that was really good roni, much appreciated.

Shiwei Xu

Good!!!

MATLAB Release Compatibility
Created with R2015b
Compatible with any release
Platform Compatibility
Windows macOS Linux