Undervoltage Relay Block
Undervoltage Protection Relay that operates when the voltage is less than the predetermined value.
You are now following this Submission
- You will see updates in your followed content feed
- You may receive emails, depending on your communication preferences
Undervoltage Relay (ANSI/IEEE C37.2 device number 27) that operates when the voltage is less than the predetermined value.
Undervoltage Setting (U <<)
Specify undervoltage setting ranging from 1% to 25%.
Undervoltage Time Delay Setting (t <<)
Specify undervoltage time delay ranging from 0.1s to 30s for under voltage ride through.
Nominal Phase-to-Ground Voltage (Vrms)
Specify the relay nominal phase-to-ground RMS voltage measurement.
Fundamental Frequency (Hz)
Specify the RMS current measurement fundamental frequency, in hertz, of the input signal.
Cite As
Rodney Tan (2026). Undervoltage Relay Block (https://www.mathworks.com/matlabcentral/fileexchange/63339-undervoltage-relay-block), MATLAB Central File Exchange. Retrieved .
General Information
- Version 1.0.0.0 (26.2 KB)
MATLAB Release Compatibility
- Compatible with any release
Platform Compatibility
- Windows
- macOS
- Linux
| Version | Published | Release Notes | Action |
|---|---|---|---|
| 1.0.0.0 |
