DIC_pat_gcode: to 3d print designed speckle patterns
To generate G-code scripts that acts as input for a 3d printer to print designed speckle patterns.
You are now following this Submission
- You will see updates in your followed content feed
- You may receive emails, depending on your communication preferences
# DIC_pat_gcode
To generate G-code scripts that acts as input for a 3d printer to print designed speckle patterns.
## Prerequisites & Installation
DIC_pat_gcode was tested on MATLAB versions later than R2018a.
## Citation
If used please cite
```bibtex
@article{,
title={Smart Digital Image Correlation Patterns via 3D Printing},
author={Yang, J. and Tao, J. and Franck, C.},
journal={Experimental Mechanics},
year={2021},
Url={https://doi.org/10.1007/s11340-021-00720-x}
}
```
[1] J Yang, JL Tao, C Franck. Smart Digital Image Correlation Patterns via 3D Printing. Experimental Mechanics, 2021.
Full text can be requested at:
* Official Website:
* ResearchGate: https://www.researchgate.net/publication/350558776_Smart_Digital_Image_Correlation_Patterns_via_3D_Printing
## Contact and support
Email: Dr. Jin Yang, jyang526@wisc.edu; Jialiang Tao, jtao22@wisc.edu; Prof. Christian Franck, cfranck@wisc.edu
Welcome to give us ratings and make comments!
Cite As
Jin Yang*, Jialiang Tao* (2021). DIC_pat_gcode: Generate G-code files to control a 3D printer (https://github.com/FranckLab/DIC_pat_gcode), GitHub. Retrieved April 13, 2021. (*: Equal contributions)
General Information
- Version 1.0.4 (964 KB)
-
View License on GitHub
MATLAB Release Compatibility
- Compatible with any release
Platform Compatibility
- Windows
- macOS
- Linux
Versions that use the GitHub default branch cannot be downloaded
| Version | Published | Release Notes | Action |
|---|---|---|---|
| 1.0.4 | See release notes for this release on GitHub: https://github.com/FranckLab/DIC_pat_gcode/releases/tag/v1.0.4 |
||
| 1.0.2 | Update code image |
||
| 1.0.1 | Update manual; update logo; |
||
| 1.0.0 |
