Answered

Matrix dimensions must agree Error

A is [8x8] and B is [8x1]. Do you mean to do the |mrdivide| operation, "/"? Or do you mean to do element-wise division "./"? If ...

Matrix dimensions must agree Error

A is [8x8] and B is [8x1]. Do you mean to do the |mrdivide| operation, "/"? Or do you mean to do element-wise division "./"? If ...

1 year ago | 0

Answered

When loading .mat files in a parfor, the first time is way slower than the second time.

So you're doing something like this? for k = 1:10 mydata = load('myfile.mat'); output = someFunction(mydata); end T...

When loading .mat files in a parfor, the first time is way slower than the second time.

So you're doing something like this? for k = 1:10 mydata = load('myfile.mat'); output = someFunction(mydata); end T...

1 year ago | 0

Answered

How do I remove the brackets from the numeric values around the zeros, so that only the numeric values are left and I am able to use boolean logic to get a solution ( 1 or 0)?

Hmm, seems like this was an opportunity to apply what you learned yesterday regarding regexprep, if you're trying to remove/repl...

How do I remove the brackets from the numeric values around the zeros, so that only the numeric values are left and I am able to use boolean logic to get a solution ( 1 or 0)?

Hmm, seems like this was an opportunity to apply what you learned yesterday regarding regexprep, if you're trying to remove/repl...

1 year ago | 1

| accepted

Answered

how can I improve this code???!!!

You should try preallocating margin before the loop. You have only set the value to one element, of zero. Since it's not clear h...

how can I improve this code???!!!

You should try preallocating margin before the loop. You have only set the value to one element, of zero. Since it's not clear h...

1 year ago | 2

| accepted

Answered

Finding series/pattern in an array

If you have the signal processing toolbox you can do this pretty easily using the functions risetime and pulsewidth. You just ha...

Finding series/pattern in an array

If you have the signal processing toolbox you can do this pretty easily using the functions risetime and pulsewidth. You just ha...

1 year ago | 0

Answered

Asking the error of 'Out of memory'

You are trying to allocate memory to a matrix for more memory than is available in your RAM. The solution completely depends upo...

Asking the error of 'Out of memory'

You are trying to allocate memory to a matrix for more memory than is available in your RAM. The solution completely depends upo...

1 year ago | 1

Answered

how to plot quiver evenly along lines?

I just took a closer look and it is what I suspected. In your loop over NL1 you are only storing the outputs, D1 and D2, for the...

how to plot quiver evenly along lines?

I just took a closer look and it is what I suspected. In your loop over NL1 you are only storing the outputs, D1 and D2, for the...

1 year ago | 1

Answered

Linspace with varying increment

MATLAB provides functions that do basic things, like create linearly spaced vectors using the colon operator or linspace. It is ...

Linspace with varying increment

MATLAB provides functions that do basic things, like create linearly spaced vectors using the colon operator or linspace. It is ...

1 year ago | 1

| accepted

Answered

Problem of finding lag when using xcorr

Yes, running this gives a max lag at 0. That is indicating that y matches x the best in their current positions. Shifting y by a...

Problem of finding lag when using xcorr

Yes, running this gives a max lag at 0. That is indicating that y matches x the best in their current positions. Shifting y by a...

1 year ago | 1

Answered

decrease calculation accuracy to speed up running time

The reason your algorithm is taking so much time is because of the line COPT(u+1,:)=[]; What happens when you delete an entry ...

decrease calculation accuracy to speed up running time

The reason your algorithm is taking so much time is because of the line COPT(u+1,:)=[]; What happens when you delete an entry ...

1 year ago | 4

| accepted

Answered

RLC Circuit Equation Implementation-Runge Kutta

Instead of this derriv_value = L*y(3)+R*y(2)+(1/C)*y; Do you mean this? derriv_value = L*y(3)+R*y(2)+(1/C)*y(1);

RLC Circuit Equation Implementation-Runge Kutta

Instead of this derriv_value = L*y(3)+R*y(2)+(1/C)*y; Do you mean this? derriv_value = L*y(3)+R*y(2)+(1/C)*y(1);

1 year ago | 1

| accepted

Answered

Question about printing ode45 results

You have the vectors time, and u1d (etc) outside of the ode45 call. And you also have the output t from the ode45 call. So,you c...

Question about printing ode45 results

You have the vectors time, and u1d (etc) outside of the ode45 call. And you also have the output t from the ode45 call. So,you c...

1 year ago | 2

| accepted

Answered

Output of mscohere function

Yes, these are the coherence values between the two channels at the frequencies returned in F. You can manually set the frequenc...

Output of mscohere function

Yes, these are the coherence values between the two channels at the frequencies returned in F. You can manually set the frequenc...

1 year ago | 1

| accepted

Answered

Integration of Velocity data to Displacement

Use |cumtrapz| as in displacement = cumtrapz(velocity)/fs; % where fs is your sampling rate Then you can assess afterwar...

Integration of Velocity data to Displacement

Use |cumtrapz| as in displacement = cumtrapz(velocity)/fs; % where fs is your sampling rate Then you can assess afterwar...

1 year ago | 1

Answered

How to change ONLY Xtick direction (or Ytick direction)

You have to set the properties of the specific axis. figure plot(1:10) ax = gca; xax = ax.XAxis; % xax = get(ax,'XAxis'); ...

How to change ONLY Xtick direction (or Ytick direction)

You have to set the properties of the specific axis. figure plot(1:10) ax = gca; xax = ax.XAxis; % xax = get(ax,'XAxis'); ...

1 year ago | 1

| accepted

Answered

lines are not continuous

It's not perfect, but it might be sufficient. That's up to you. Play with the different values for dipreset. You might want to s...

lines are not continuous

It's not perfect, but it might be sufficient. That's up to you. Play with the different values for dipreset. You might want to s...

1 year ago | 1

| accepted

Answered

remove outliers form timeseries

If timevector is the name of your datetime vector, then you can mask out the outliers using timevector_good = timevector(~TF); ...

remove outliers form timeseries

If timevector is the name of your datetime vector, then you can mask out the outliers using timevector_good = timevector(~TF); ...

1 year ago | 1

| accepted

Answered

Creating a color map of green and blue

Perhaps one of these colormap functions by Chad Greene would be useful to you: https://www.mathworks.com/matlabcentral/fileexch...

Creating a color map of green and blue

Perhaps one of these colormap functions by Chad Greene would be useful to you: https://www.mathworks.com/matlabcentral/fileexch...

1 year ago | 0

Answered

How to remove the background noise from a signal?

Seems like you have determined what you want your threshold to be. You can set those values to zero (or whatever the mean of y...

How to remove the background noise from a signal?

Seems like you have determined what you want your threshold to be. You can set those values to zero (or whatever the mean of y...

1 year ago | 1

| accepted

Answered

How can I remove the default transparency of graph edges?

set(P,'EdgeAlpha',1);

How can I remove the default transparency of graph edges?

set(P,'EdgeAlpha',1);

1 year ago | 1

| accepted

Answered

How can I find the width of the peaks when presented with a digital signal-like plot?

Use the pulsewidth function with the argument MidPercentReferenceLevel set to 0 or 1 (the lowest value). Here is an example: x ...

How can I find the width of the peaks when presented with a digital signal-like plot?

Use the pulsewidth function with the argument MidPercentReferenceLevel set to 0 or 1 (the lowest value). Here is an example: x ...

1 year ago | 1

| accepted

Answered

using variables in a parfor loop

I think it's because you're using d as the source and the sink in your loop, and you're assigning to d in a way that can make pr...

using variables in a parfor loop

I think it's because you're using d as the source and the sink in your loop, and you're assigning to d in a way that can make pr...

1 year ago | 0

Answered

Is there a way to use different sets of input arguments for one function?

It just requires you to check the type of each input argument. I think it would be easier to use a struct (or even an object) wi...

Is there a way to use different sets of input arguments for one function?

It just requires you to check the type of each input argument. I think it would be easier to use a struct (or even an object) wi...

1 year ago | 2

| accepted

Answered

EEG is a voltage signal in time domain (voltage amplitude vs time). how can we convert this EEG into amplitude vs frequency?

To convert from the time domain to the frequency domain, use the *fft* function. Though you might actually get more use out of t...

EEG is a voltage signal in time domain (voltage amplitude vs time). how can we convert this EEG into amplitude vs frequency?

To convert from the time domain to the frequency domain, use the *fft* function. Though you might actually get more use out of t...

1 year ago | 1

Answered

EEG data preprocessing in matlab and EEGLAB

It seems pretty clear what the differences are. F is using a different file format. Choose your favourite. S is an option whethe...

EEG data preprocessing in matlab and EEGLAB

It seems pretty clear what the differences are. F is using a different file format. Choose your favourite. S is an option whethe...

1 year ago | 1

Answered

Signal Processing EEG ECG

One method would be to use a moving RMS calculation over a small time window. You should know what a reasonable rms value is (ba...

Signal Processing EEG ECG

One method would be to use a moving RMS calculation over a small time window. You should know what a reasonable rms value is (ba...

1 year ago | 1

Answered

Bandpass Filtering EEG Data

Here's your problem tmp(tmp==0)=NaN; Don't do that.

Bandpass Filtering EEG Data

Here's your problem tmp(tmp==0)=NaN; Don't do that.

1 year ago | 1

Answered

How to Plot(Time, Voltage) so that transient is captured for different inputs

One possible idea is to use a multiple of the time constant for the circuit. For a parallel RLC circuit this is 2RC, and for ser...

How to Plot(Time, Voltage) so that transient is captured for different inputs

One possible idea is to use a multiple of the time constant for the circuit. For a parallel RLC circuit this is 2RC, and for ser...

1 year ago | 1

| accepted

Answered

Smoothing a roughly sinusoidal signal

So are you saying you want to remove the frequency of the blue signal from the brown signal? Fairly easy, just use a notch/bands...

Smoothing a roughly sinusoidal signal

So are you saying you want to remove the frequency of the blue signal from the brown signal? Fairly easy, just use a notch/bands...

1 year ago | 0

Answered

Signal similarity analysis after cross correlation

Wouldn't it work just to set the threshold higher? It depends on what you mean by matching. If you want the exact same signal, ...

Signal similarity analysis after cross correlation

Wouldn't it work just to set the threshold higher? It depends on what you mean by matching. If you want the exact same signal, ...

1 year ago | 2

| accepted