Teledyne DALSA Support from Image Acquisition Toolbox

Use Teledyne DALSA GigE cameras and frame grabbers with MATLAB and Simulink to acquire video and images on PCs.

Using Teledyne DALSA® cameras with MATLAB® and Simulink®, you can capture live video and images directly into your image processing and computer vision workflows.

The table below lists the supported frame grabbers on 32-bit and 64-bit Windows® systems. For detailed information about a frame grabber listed here, please visit the Teledyne DALSA Web site.

Depending on the frame grabber, Image Acquisition Toolbox™ requires either Imaging Sapera LT version 6.3 or 7.2, or Foundation Classes (IFC) version 5.8.

Supported Hardware

InterfaceProduct NameMinimum Version Required
 AnalogPC2-COMP ExpressSapera LT (Version 7.2), IFC (version 5.8)
 PC2-Vision ExpressSapera LT (Version 7.2), IFC (version 5.8)
 PC2-VisionSapera LT (Version 7.2), IFC (version 5.8)
 PC-RGBSapera LT (Version 6.3), IFC (version 5.8)
 PCVisionSapera LT (Version 6.3), IFC (version 5.8)
 PCVisionPlusSapera LT (Version 6.3), IFC (version 5.8)
 Xcelera-AN LX1 QuadSapera LT (Version 7.2), IFC (version 5.8)
 X64-AN QuadSapera LT (Version 7.2), IFC (version 5.8)
 Camera LinkPC2-CamlinkSapera LT (Version 6.3/7.2), IFC (version 5.8)
 PC-CamlinkIFC (version 5.8)
 Xcelera-CL PX4 DualSapera LT (Version 6.3/7.2)
 Xcelera-CL PX4 FullSapera LT (Version 6.3/7.2)
 Xcelera-CL PX4 SESapera LT (Version 6.3/7.2)
 Xcelera-CL+ PX8 FullSapera LT (Version 6.3/7.2)
 Xcelera-CL LX1 BaseSapera LT (Version 6.3/7.2)
 Xcelera-HS PX8Sapera LT (Version 6.3/7.2)
 XRI-1600Sapera LT (Version 6.3/7.2)
 X64-CL DualSapera LT (Version 6.3/7.2)
 X64-CL ExpressSapera LT (Version 6.3/7.2)
 X64-CL FullSapera LT (Version 6.3/7.2)
 X64-CL iProSapera LT (Version 6.3/7.2)
 LVDS/RS-422X64-LVDSSapera LT (Version 6.3/7.2)
 Xcelera-LVDS PX4Sapera LT (Version 6.3/7.2)
 RS- 422/EIA-644PC-DIGIFC (version 5.8)

MathWorks Requirements



Also supported in student and home software.


Support Package


Support Package Installer installs this support package. To start the installer, go to the MATLAB toolstrip and click Add-Ons > Get Hardware Support Packages. For more information, read the documentation.

For IFC Hardware:

For Sapera Hardware:

Third-Party Requirements



Request Hardware Support