Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Activate an Installation with an Internet Connection

Activation is performed after you have successfully installed the software and are ready to use it. Normally, the installer continues to activation as part of the entire installation process. This topic describes the activation process. If you have not yet installed MATLAB®, first follow the procedure in Install Products with an Internet Connection (Installation, Licensing, and Activation).

There may also be cases when you are asked to activate the software that was not installed by you. If so, follow this procedure if you have an internet connection. If you do not, follow the instructions in Activate an Installation Without Internet Access (Installation, Licensing, and Activation).

Step 1: Start the Activation Application

To start the activation application, use one of the following methods:

  • Leave the Activate MATLAB check box selected on the Installation Complete dialog box at the end of installation.

  • Start an installation of MATLAB that has not been activated.

  • If you have MATLAB running, on the Home tab, in the Resources section, select Help > Licensing > Activate Software.

  • Navigate to your MATLAB installation folder and open the activation application.

    Windows — Double-click the activate_matlab.exe file in matlabroot/bin/$ARCH folder, where matlabroot is your MATLAB installation folder, and $ARCH is a platform-specific subfolder, for example: matlabroot\bin\win64

    Linux and Mac OS X — Execute the activate_matlab.sh script in the matlabroot/bin folder.

  • Mac OS X — Double-click the activation application icon in the MATLAB application package. To view the contents of the MATLAB application package, right-click (or Ctrl+click) the package and select Show Package Contents.

Step 2: Choose Whether to Activate Automatically or Manually

Activation is a process that verifies licensed use of MathWorks® products. This process validates the license and ensures that it is not used on more computers or by more users than allowed by the license option you have acquired.

If you let the installer start the activation application, and you were logged in to your MathWorks Account during installation, your login session continues into the activation process. Click Next to proceed with activation.

If you were not logged in to your MathWorks Account during installation, or you started the activation application independently, you must choose whether to activate automatically or manually. If you are connected to the Internet, leave the Activate automatically using the Internet (recommended) option selected. Activating immediately after installation is the quickest way to start using MATLAB.

If you are not connected to the Internet, select Activate manually without the Internet. If you select this option, you need a License File to activate manually. Your License File identifies the products you can run. Contact the Administrator of the license to get the file if you do not already have it.

Specify a Proxy Server

Note

On Windows systems, the activation application uses your system proxy settings by default.

If your Internet connection requires a proxy server, click the Connection Settings button. You can enter the server name and port information in the Proxy Settings dialog box, and access other activation options. MathWorks supports several types of proxy configurations: Basic authentication and Digest authentication.

Step 3: Log in to Your MathWorks Account

Note

If you continued with activation immediately after installation, and you logged in to your account during installation, the activation application skips this step.

Enter the email address and password of your MathWorks Account and click Next. The activation application contacts MathWorks to retrieve the licenses associated with your account. If you have enabled Two-Step Verification on your account, a verification code is sent to your primary method.

If you do not have a MathWorks Account, select the I need to create an Account (requires an Activation Key) option and click Next.

If you already have a License File, select the Enter the full path to your license file, including the file name option, specify the complete path to the file, and click Next. Your License File identifies the products you can run. Contact the administrator of your license to obtain this License File. After specifying the License File, the activation application skips all the subsequent steps in the process and goes directly to the Activation Complete dialog box.

Create a MathWorks Account

To create an account, enter your email address, first name, last name, and password. You must also provide an Activation Key. A newly created account does not have any licenses associated with it. The Activation Key identifies the license you want to activate.

Note

Entering dashes or spaces for the Activation Key is optional.

The administrator on the license can retrieve the key by visiting the License Center at the MathWorks website.

Click Next to create your account.

Note

When you create a new MathWorks Account, you must verify your email address before you can proceed with activation. Before you click Next in the Email Verification Required dialog box, go to your email program, open the message from MathWorks, and click the verification link. Then return to this dialog box and click Next.

Step 4: Enter Two-Step Verification Code

If you have Two-Step Verification enabled (in your MathWorks Account), you will be prompted to enter the verification code sent to your primary method when you signed in to your MathWorks Account. If you do not have Two-Step Verification enabled, you can skip this step and go to Step 5: Select the License (Installation, Licensing, and Activation).

Note

If you continued with activation immediately after installation, and you verified your account during installation, the activation application skips this step.

Enter the verification code sent to your primary method.

Step 5: Select the License

Note

If you continued with activation immediately after installation, the activation application assumes you want to activate the license you just installed and skips this step. Likewise, if you created an account in the previous step and specified an Activation Key, the activation application skips this step.

Select a license from the list of licenses associated with your MathWorks Account and click Next. The list contains the following information about the licenses:

If you want to activate products on a license that is not associated with your MathWorks Account, select the Enter an Activation Key for a license not listed option, enter an Activation Key, and click Next. An Activation Key is the unique code that identifies a license. You can use the key to activate a license or associate a license with your account. Ask the administrator of the license for the Activation Key.

Note

Entering dashes or spaces for the Activation Key is optional.

Step 6: Specify the User Name

Note

The activation application skips this step when the license is a Designated Computer License.

If you selected an Individual License, you must specify the operating system user name of the person who will use the software. The Individual License limits use of the software to a particular user on a particular computer. MathWorks uses the operating system user name to identify this person. The operating system user name is the ID through which a user gains access to a computer. This ID is also known as the computer login name. To use MathWorks software, you must be logged into the computer as the user name that you specify.

By default, the activation application fills in the user name of the person running the activation application. To accept this default, click Next. If you used your administrator account to install the software but will use another account to access the software, you can specify that user name here, then click Next.

Step 7: Confirm Your Activation Information

If all the information displayed is correct, click Confirm.

Note

Depending on the method of installation that you use and your operating system, the confirmation information can vary from the example shown here.

To activate an installation, MathWorks creates a License File that:

  • Restricts use to only the computer with the installation

  • Restricts use to a particular user if you have activated an Individual License

The installer then copies this License File onto your computer. This License File enables you to run MathWorks products on your computer. MathWorks also keeps a record of the activation in MathWorks systems.

Step 8: Complete the Activation

After activating your installation, click Finish to exit the activation process.

Step 9. What's Next?

Now that MATLAB and any accompanying toolboxes have been installed, you are ready to begin using MathWorks software. See one of the following topics to get started:

Related Topics