Main Content

Supported IDE Platforms

IDEs Supported for Structured Text Generation

The Simulink® PLC Coder™ product is tested with these IDE platforms:

  • 3S-Smart Software Solutions CODESYS Version 2.3 or 3.3 or 3.5 (SP4 or later)

  • B&R Automation Studio® 3.0 or 4.0

  • Beckhoff® TwinCAT® 2.11 or 3

  • PHOENIX CONTACT Software MULTIPROG® 5.0 or 5.50.

    PHOENIX CONTACT Software GmbH was previously called KW-Software GmbH. The Simulink PLC Coder software supports only the English version of MULTIPROG target IDE.

  • OMRON® Sysmac® Studio Version 1.04, 1.05, 1.09 or 1.12

  • Phoenix Contact® PC WORX™ 6.0

    The Simulink PLC Coder software supports only the English version of Phoenix Contact PC WORX target IDE.

  • Rexroth IndraWorks version 13V12 IDE

  • Rockwell Automation® RSLogix™ 5000 Series Version 17, 18, 19 or 20 and Rockwell Studio 5000 Logix Designer Version 21 or 24

    Simulink PLC Coder can generate code for Add-On instructions (AOIs) and routine code. The software supports automatic import and verification of generated code only for the RSLogix IDEs and not the Studio 5000 IDE.

  • Siemens® SIMATIC® STEP® 7 Version 5.3, 5.4, or 5.5

    The Simulink PLC Coder software assumes that English systems use English S7 and that German systems use German S7.

  • Siemens TIA Portal V14

  • Generic

  • PLCopen XML

  • Selectron CAP1131 IDE

For a list of supported IDEs and platforms, see Supported IDEs at the MathWorks® website.

IDEs Supported for Ladder Diagram Code Generation

The Simulink PLC Coder product is tested with these IDE platforms:

  • 3S-Smart Software Solutions CODESYS Version 3.5 SP6

  • Rockwell Automation RSLogix 5000 Series Version 20 and Rockwell Studio 5000 Logix Designer Version 24

  • PLCopen XML