How do I change the font size for text in my figure?

I'm using "set(gca,'fontsize', 18);" in a function to change fonts in a figure. My code does not throw an error, but it also does not change the font size. I can manually change the fonts via the UI, but this is a slow process. I'm running MATLAB 2013a on RHEL6.5

I've also tried "set(gca,'FontSize', 18);" and specifying 'FontSize', 18 in title, xlabel, ylabel and legend. None of these have worked.

Please advise!

[the cyclist]

Could you post the simplest possible code that exhibits the problem, and be very specific about which fonts you are trying to change?

[Tomas]

I have the same problem. No idea how to solve it... :-(

[Herbert]

See Daniels solution here: http://www.mathworks.com/matlabcentral/answers/1238-font-size-changes-in-figures -- summarized:

 - sudo apt-get install xfonts-base xfonts-100dpi xfonts-75dpi
 - log out
 - log in

Assuming ubuntu/mint linux

[Brennan Dubuc]

I've had the same problem on R2014b, but strangely putting a hold on solved it for me. For instance: ----------------------

figure

set(gca,'fontsize',18)

hold on

plot(x,y)

hold off

----------------------

When I use this, the font changes size. When I take the hold away, the font doesn't change. Not sure why, but it at least solved the problem pretty easily.

[Carry]

If you set axis properties in your figure (XLim, YLim etc) you have to give the command referring to the fontsize at the end. So first the plot command then axis properties and then ylabel with fontsize. Maybe there's another way but this did it for me.

[hassan roohian]

>> help xlabel...

xlabel('text','property1',property1value,'property2',property2value)

here is an example...

title('speed vs. time','fontsize',18);

you can include more properties inside the parenthesis, i only did one in my example

[Ian Hunter]

Edward's sol worked for me on ubuntu w/ R2016A many thx!

[voltmeter cav]

Here is my lines. I am using 2014a version. if I put "set(gca... )" line in 6th line, it does not change the font. but if I put this to the end of lines it works.

1 t=0:0.1:6;

2 x=(t.^2)/2;

3 y=(t.^2)/4;

4 z=(t.^2)/8;

5 k=(t.^2)/16;

6 %set(gca,'Fontsize',20);

7 plot(t,x,'lineWidth',2);

8 grid on;

9 hold on;

10 plot(t,y,'lineWidth',2);

11 hold on

12 plot(t,z,'lineWidth',2);

13 hold on;

14 plot(t,k,'lineWidth',2);

15 xlabel('(Sn)','Fontsize',20);

16 ylabel('(J)','Fontsize',20);

17 legend({'L=1H','L=2H','L=4H','L=8H'},'Fontsize',20);

18 set(gca,'Fontsize',20);

[Image Analyst]

Here is code that shows you how to change just about anything about the axes that you want:

% Demo to make a black graph with blue title, red Y axis, green X axis, and yellow grid.
% Initialization steps:
clc;    % Clear the command window.
close all;  % Close all figures (except those of imtool.)
clearvars;
workspace;  % Make sure the workspace panel is showing.
format long g;
format compact;
fontSize = 24;

% Create sample data.
X = 1 : 20;
Y = rand(1, 20);
plot(X, Y, 'gs-', 'LineWidth', 2, 'MarkerSize', 10);
grid on;
title('Y vs. X, Font Size 12', 'FontSize', 12, 'Color', 'b', 'FontWeight', 'bold');
% Make labels for the two axes.
xlabel('X Axis, Font Size 15');
ylabel('Y axis, Font Size 24');
yticks(0 : 0.2 : 1);
% Get handle to current axes.
ax = gca
% This sets background color to black.
ax.Color = 'k'
ax.YColor = 'r';
% Make the x axis dark green.
darkGreen = [0, 0.6, 0];
ax.XColor = darkGreen;
% Make the grid color yellow.
ax.GridColor = 'y';
ax.GridAlpha = 0.9; % Set's transparency of the grid.
% Set x and y font sizes.
ax.XAxis.FontSize = 15;
ax.YAxis.FontSize = 24;
% The below would set everything: title, x axis, y axis, and tick mark label font sizes.
% ax.FontSize = 34;
% Bold all labels.
ax.FontWeight = 'bold';
hold off

[Alex Hruksa]

This bit of code is super useful, thanks Image Analyst!

Answer 1

[Image Analyst]

Usually you can set the font size on every control individually as you update its text, like

title('This is my plot', 'FontSize', 24);
xlabel('x axis', 'FontSize', 24);
text(x, y, 'Hey, look at this', 'FontSize', 24);

What's wrong with doing it like that? That's what I do.

[Edward]

I tried that. It doesn't work :(

[Image Analyst]

I find that hard to believe. Here, try this code:

subplot(2,2,1);
title('This is 12 point font', 'FontSize', 12);
subplot(2,2,2);
title('This is 18 point font', 'FontSize', 18);
subplot(2,2,3);
title('This is 24 point font', 'FontSize', 24);
subplot(2,2,4);
title('This is 30 point font', 'FontSize', 30);

Then type alt-PrintScreen and go to http://snag.gy and paste in your screenshot. Then come back here and use the image icon to past in the snaggy URL to include your screenshot here so I can see and verify that what you say about the 'FontSize' option not working is true.

[Edward]

Here's the screen shot, as requested...

[Image Analyst]

I don't know. That's bizarre. You should call tech support.

[Peter]

well, probably this font is not available in other sizes

Answer 2

[Mike Garrity]

Yes, this can be confusing. Here's what you're probably seeing:

figure                 % Creates a figure
set(gca,'FontSize',18) % Creates an axes and sets its FontSize to 18
plot(x,y)              % Resets the axes and plots into it

Notice the "Resets the axes" part. One of the things that happens there is that the FontSize property gets set to the default!

This doesn't happen when hold is on because then the axes doesn't get reset.

There are a couple of ways around this.

The simplest is to set the FontSize after plotting.

A somewhat more complicated way is to change the default:

figure('DefaultAxesFontSize',18)
plot(x,y)

Does that make sense?

[Rik]

The point is that the font size property is inherited from the figure. So instead of calling gca, you should call gcf. But indeed, best practice is setting the font size on creation of the figure window.

Answer 3

[José Crespo Barrios]

set(findall(gcf,'-property','FontSize'),'FontSize',18)

[Ian Hunter]

When I invoke this after a call to figure, there does not appear to be any change in text size.

[Ian Hunter]

on ubuntu w/ R2016A

[ubaid haroon]

I use this on unix R2015a and it seems to work for me

Answer 4

[Sean de Wolski]

I think what you want to do is set the 'Default' font size for the axes

set(gca,'DefaultTextFontSize',18)

Now any text object on that axes will have 18 font

text(0.5,0.5,'hello')

[Image Analyst]

Edward's "Answer" moved here since it's a reply to Sean:

set(gca,'DefaultTextFontSize',18) executes without triggering an error, but unfortunately, does not change the font size.

[vvf vvff]

This command is awoseme!!!!!!!!!!!!

[Image Analyst]

Or, since r2014b, you can do it without the set() function:

ax = gca;
ax.DefaultTextFontSize = 18;

[DN7]

If gca does not work for you, make sure you didn't accidentally create a variable named that way. use:

clearvars gca
h_gca=gca;
h_gca.FontSize=13;

to ensure that. I accidentally created this variable (struct) when I ran gca.FontSize = 13, which does not change the font size of the current axis, but instead creates a new struct.

Answer 5

[Renato Campana]

Im working with Matlab 2016. You can tried two things:

1)figure('DefaultAxesFontSize',30); % here the font size is 30. figure (1) plot(x,y,'LineWidth',4); % note that the linewidth here is 4 xlabel('length bar','FontSize',18); % note that the font size label here is 18 ylabel('wide bar','FontSize',18); % note that the font size label here is 18

and you must to use the dame command figure('DefaultAxesFontSize',30) in each figure. If you dont specified the font size in each label, the labels shows the size in "30"

Or you can tried:

2) figure (1) plot(x,y,'LineWidth',4); set(gca,'FontSize',28); % please, note that the font size is AFTER the plot command :)

[Chekad Sarami]

Great thanks.

Answer 6

[Anu]

I have also encountered the same problem. I was using Linux Mint OS. I solved it by installing the xfont 100 and 75 dpi and the truetype fonts. Try it out once.

Answer 7

[Daniel]

I just wanted to weigh in on this given I've spent the last couple of hours looking into this.

I am running Matlab 2013b on Ubuntu 12.04LTS. Similar as many here, changing labels/legend properties works fine but setting the axis ticklabel fontname/size was not working - at least, the axis property list reflected the change, but the window plot was not rendering to the new font settings. After printing the plot to eps and including this in my latex compiled document, it turns out the axis font properties were changing. It would appear to be just a rendering bug.

Installing additional fonts did not work for me - and I did not expect to, since rendering/changing font properties of other objects such as labels and legends worked fine in Matlab.

So for those of you cocnerned with the looks of your plots for publications, it would appear to me that the actual exported figures do reflect the editing (at least this was my experience when printing to .eps).

Cheers,

Daniel

Answer 8

[vimal kumar chawda]

figure(4)
set(gca,'FontSize',50)
plot(A_OBS(2).RxTime(:)/3600, No_ele2(1:r2, 1), '.b');
hold on;
plot(A_OBS(4).RxTime(:)/3600, No_ele4(1:r4, 1)-0.05, '.g');
xlabel('Time [h], Font size 15');
ylabel('Number of visible satellites,Font size 15');
title('Comparison between Javad and u-blox receivers (Gallileo)');
legend('Javad(SN:0082)','u-blox(SN:1771)');

Why it is not working ?

I need to maximize the scale and the text in the axis scale.

Answer 9

[MathWorks Support Team]

https://www.mathworks.com/matlabcentral/answers/507982-how-do-i-change-the-font-size-of-text-in-a-figure