MATLAB Answers

Simulink toolbox to model pv array, battery, inverter, dc-dc converter, mppt, grid

9 views (last 30 days)
Md.
Md. on 26 Jun 2015
Commented: Sven glöyer on 28 Mar 2017
Hi there,
I have to model a complete pv system which will charge a battery, the battery is connected to an inverter and the inverter either provides power to house or sends it back to the grid.
Now there are various toolboxes such as SimPowerSystems and SimElectronics to model these components. Which one do you think I should use to model all of the above components so they are all compatible with each other?

  0 Comments

Sign in to comment.

Answers (2)

Javier Gazzarri
Javier Gazzarri on 19 Jul 2015
Hello, Md.,
If the AC part of your system is three-phase and you can neglect thermal effects on the semiconductor devices and the battery, SimPowerSystems is probably your best choice. It offers off-the-shelf blocks for PV arrays, batteries, and the grid, in addition to a comprehensive list of semiconductor components for your DCDC converter and inverter.
Kind regards,
Javier

Javier Gazzarri
Javier Gazzarri on 23 Jul 2015
Hi, Md.,
You can still use SPS in that case. The main difference with SimElectronics is that the latter models all nonlinearities explicitly, whereas the former solves the system in a piecewise linear approximation.
Javier

  1 Comment

Sven glöyer
Sven glöyer on 28 Mar 2017
Hi,
I would like to know if it is possible to have a single PV array block With a maximum power point of 2 or 5 MW and how. Because i am trying to do so but the output values i measured are not correct... Thank you in advance

Sign in to comment.

Sign in to answer this question.