Convert Arduino Code to Matlab

Hello,

is it possible to convert the following code from the Arduino IDE to Matlab?

help me please

#include <MD_Parola.h>

#include <MD_MAX72xx.h>

#include <SPI.h>

#define HARDWARE_TYPE MD_MAX72XX::FC16_HW

#define MAX_DEVICES 4

#define CLK_PIN 13

#define DATA_PIN 11

#define CS_PIN 10

#define scrollSpeed 70 // scroll speed

#define scrollPause 0 // ms of pause after finished displaying message

// Hardware SPI connection

MD_Parola P = MD_Parola(HARDWARE_TYPE, CS_PIN, MAX_DEVICES);

// Arbitrary output pins

// MD_Parola P = MD_Parola(HARDWARE_TYPE, DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES);

// sets scrolling direction if slider in middle at start

textEffect_t scrollEffect = PA_SCROLL_LEFT;

textPosition_t scrollAlign = PA_LEFT; // how to align the text

#define BUF_SIZE 75 // Maximum of 75 characters

#define trigPin A0

#define echoPin A1

char testStr[10] = { "" };

String heightStr = "";

long duration;

int distance;

int height;

void setup() {

pinMode(trigPin, OUTPUT); // Sets the trigPin as an Output

pinMode(echoPin, INPUT); // Sets the echoPin as an Input

Serial.begin(9600); // Starts the serial communication

P.begin();

}

void loop() {

measure();

if (distance > 60) {

P.displayText("TINGGI", PA_LEFT, 0, 0, PA_PRINT, PA_NO_EFFECT);

} else {

height = 180 - distance;

heightStr = String(height, DEC) + "cm";

heightStr.toCharArray(testStr, 75);

P.displayText(testStr, PA_CENTER, 0, 0, PA_PRINT, PA_NO_EFFECT);

}

P.displayAnimate();

delay(100);

}

void measure() {

digitalWrite(trigPin, LOW);

delayMicroseconds(2);

digitalWrite(trigPin, HIGH);

delayMicroseconds(10);

digitalWrite(trigPin, LOW);

duration = pulseIn(echoPin, HIGH);

distance = duration * 0.017;