Can this Arduino code be converted to work on Matlab?

// ------- Tank details ------//

const int total_height = 30; // Tank height in CM

const int hold_height = 25;// Water hold height in CM

//----- Your Phone no. -------//

char cntry_code[] = "+91"; // Country code

char ph[] = "xxxxxxxxxx"; // owner's (receiver's) phone no.

const int trigger = 2;

const int echo = 3;

int var_1 = 0;

char input_string[15];

long Time;

int distanceCM;

int resultCM;

int tnk_lvl = 0;

int sensr_to_wtr = 0;

void setup()

{

Serial.begin(9600);

pinMode(trigger, OUTPUT);

pinMode(echo, INPUT);

sensr_to_wtr = total_height - hold_height;

delay(20000);

delay(20000);

delay(20000);

Serial.println("AT+CNMI=2,2,0,0,0");

delay(1000);

Serial.println("AT+CMGF=1");

delay(500);

Serial.print("AT+CMGS=");

Serial.print("\"");

Serial.print(ph);

Serial.println("\"");

delay(1000);

Serial.println("System is ready to receive SMS commands.");

delay(100);

Serial.println((char)26);

}

void loop()

{

}

void serialEvent()

{

while (Serial.available())

{

if (Serial.find("/"))

{

delay(1000);

while (Serial.available())

{

char input_char = Serial.read();

input_string[var_1++] = input_char;

if (input_char == '/')

{

if (!(strncmp(input_string, "status", 6)))

{

measure();

Serial.print("AT+CMGS=");

Serial.print("\"");

Serial.print(cntry_code);

Serial.print(ph);

Serial.println("\"");

delay(1000);

Serial.print("Tank water level is: ");

Serial.print(tnk_lvl);

Serial.println("%");

delay(100);

Serial.println((char)26);

}

var_1 = 0;

return;

}

}

}

}

}

void measure()

{

delay(100);

digitalWrite(trigger, HIGH);

delayMicroseconds(10);

digitalWrite(trigger, LOW);

Time = pulseIn(echo, HIGH);

distanceCM = Time * 0.034;

resultCM = distanceCM / 2;

tnk_lvl = map(resultCM, sensr_to_wtr, total_height, 100, 0);

if (tnk_lvl > 100) tnk_lvl = 100;

if (tnk_lvl < 0) tnk_lvl = 0;

}