Why am i receiving "Error:Invalid expression. When calling a function or indexing a variable, use parentheses. Otherwise, check for mismatched delimiters."? for S(K)>0
Show older comments
%General Data
G = 32.2
%none needed for this exercise
%Problem Specific Data
Simtime = 9000;
Area = 358098; %ft^2
HMAX = 6 %ft
%Time Step
N = 100; %start with 100 then go up to make it work
DT = Simtime/(N-1);
%Initial Conditions
K = 1;
Time(K) = 0;
S(K) = 0;
H(K) = 0; %depth at beginning
QI(K) = 0; %Q inlet in the beginning
%Simulation
for K = 1:N-1;
Time(K+1) = Time(K)+DT; %time at the second node
QI(K+1) = (750/pi)*(1-cos(pi*Time(K+1)/4500));
S(K+1) = S(K)+ DT*((QI(K)+QI(K+1))/(2));
H(K+1) = S(K+1)/Area
end
%Plots/ Animations
figure(1)
plot(Time,S);
xlabel('Time (s)');
ylabel('Storage');
title ('Reservoir Filling Storage vs. Time')
figure(2)
plot(Time,H);
xlabel('Time (s)');
ylabel('Depth (ft)');
title ('Reservoir Filling Depth vs Time')
%Program for Reservoir Emptying
%Implementation
Cd = .65; %discharge coefficient
d = 2; %ft
a = (pi/((4*d)^2)); %cross sectional area
Term = Cd*a*sqrt(2*G);
DT = Simtime/(N-1); %find DT use previous one and check on that?
%Initial Conditions
K = 1;
Time(K) = 0;
S(K)= S(N); %
H(K) = H(N); %max height in previous simulation
%Simulation
for S(K)>0; %as long as storage is greater than zero
Time(K+1) = Time(K)+DT;
S(K+1) = S(K)-(Term*sqrt(H(K))*DT);
H(K+1) = S/Area;
K = (K+1);
end
Accepted Answer
More Answers (0)
Categories
Find more on Clocks and Timers in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!