Raspberry Pi MPU6050-HMC5883L SFunction with I2C Communication using WiringPiI2C
9DOF S-function with MPU6050 and HMC5883L
You are now following this Submission
- You will see updates in your followed content feed
- You may receive emails, depending on your communication preferences
Building on the work of Joshua Hurst MPU6050 S-function. His original s-function had been edited to provide 9DOF with the HMC5883L.
There are two modes - Pass through where the Magnetometer Data is read directly from the HMC5883L via the AUX I2C. Then, when the MPU6050 is configured as master the Magnetometer Data is read from the Slave Registers on the MPU6050.
The I2C library used is WirnigPiI2C which comes with the target-installer distribution of RPi.
Cite As
Glen (2026). Raspberry Pi MPU6050-HMC5883L SFunction with I2C Communication using WiringPiI2C (https://www.mathworks.com/matlabcentral/fileexchange/43715-raspberry-pi-mpu6050-hmc5883l-sfunction-with-i2c-communication-using-wiringpii2c), MATLAB Central File Exchange. Retrieved .
Acknowledgements
Inspired by: Raspberry Pi MPU6050 SFunction with I2C Communication using WiringPiI2C
General Information
- Version 1.2.0.0 (41.4 KB)
MATLAB Release Compatibility
- Compatible with any release
Platform Compatibility
- Windows
- macOS
- Linux
