Simulink Model of IEEE 9 Bus System with load flow
sir can we use three-phase voltage source instead of a synchronous generator in any Ieee standard bus in Simulink model??
i really thank you from the bottom of my heart for this work. and I want to ask about:
1) the solver options also the step of integration.
2)the current of bus 9 ==>Iabc. (not Iabc_9) the phases of this bus are unstable and does it have a relationship with the method of resolution.
hi,all.. m just a learner.. so pls tell me, working procedure, and how to take the measurements.. how to connect this circuit with inverter..
Thank you for all the appreciation. Sorry for taking time to reply all of you. it's just 4 years!. i tested the file. Seems like its still working.
At bus 7 there is a line to line to fault between phase A and C. Please make the necessary change.
PMC_Port 1 and PMC_Port 12 are wrongly connected.
PMC_Port 3 and PMC_Port 10 are wrongly connected.
the correct connection should be
PMC_Port 1 to PMC_Port 10
PMC_Port 3 to PMC_Port 12
Would you mind exporting this and saving it as an mdl file.
How can be seen iteration number?
I am getting the voltage 201 KV instead of 230 KV after running the model given in the file here, can anybody help me how to correct this problem?
I also need a model with machine models with governors. Can anyone please send at my email: firstname.lastname@example.org
please anybody convert .slx to mdl file for this code because i am having 2008 version
it's all about the fault considering or creating, for example if you have consider a 3-phase balanced fault at the bus-7 then during the fault case circuit breaker corresponding to the bus -7 might open such that the reactances corresponding to the closed loop is changed due to it gets opened at g-2.for any more details and circuits of simulation do contact email@example.com
this is the response regarding to the question by @ABUVATAMIZHAN
sir i dont know how to transformer parameters and also transmission line parameters in load flow analysis can u explain me sir..
i need outputs of this simulation model
can you please send data file used for this simulation?
Dear sir, Are you have the model design of optimal capacitor location using Intelligent technique for 34 bus or 123 bus systems!
help as you can!
Do you have this model with machine models and not voltage sources?
how to create fault on this system?
It is really appreciable work, Sir.
Sir, I would like to know how have you decided the sequence parameters of the corresponding transmission line segment.
Would you mind exporting this and saving it as an mdl file. It would be much appreciated if you could make the mdl file available as well as the slx file.