Open framework handling interactions (GPIB, Ethernet, GPIB-over-Ethernet) with typical laboratory devices.

2D model of Superconducting fault current limiter on Matlab/Simulink

We proposed a 2D Electrothermal model of resistive Superconducting Fault Current Limiter (rSFCL) using Simscape toolbox of Matlab. Each layer can be parameterized from the Simulink interface. A

Power Flow in Bipolar DC Distribution Networks Considering Current Limits 10.1109/TPWRS.2022.3181851

%Created for the paper titled % "Power Flow in Bipolar DC Distribution Networks Considering Current Limits" % This paper will be published in IEEE Transactions on Power Systems%% POWER FLOW FOR

This example project can be used as a reference design to get started with designing Battery Management System with MATLAB and Simulink.

Management - Over/Under Voltage, Over Current, Over Temperature etc. 5. Charge and Discharge Current Limit Calculations To design and test these algorithms, project also includes files for 1. Li-ion Battery

Direct Torque Control strategy has been implemented for controlling the speed of a 2.2 kW Induction motor at various load torque demands.

voltage of the induction motor.In this way , the speed is tracked and the load demand is catered. The current is found to be sinusoidal and within rated current limits throughout simulation.

a class to control the MSquared Lasers 'SolsTis' laser

that can be instantiated (current limit is two, but this is easily changed in the class constructor). The class provides basic functionality of setting and reading the wavelength, applying wavelength

Synchronous Generator Capability Curve (P-Q Curve) using MATLAB

angleIn the following, three main limits of generator capability is presented:1. Armature Current LimitArmature Current Limitation will resulted in the following equations for P and Q: 2. Field Current

This function can create a Matlab structure that match a structure from C header file (.h file)

Var2; float Var3[8]; };The function is currently limit to the following data types:[double, single, int8, uint8, int16, uint16, int32, uint32, int64, uint64]['char', 'short', 'long', 'int

Model-Based Design of a DCDC Converter using Simulink, Simscape and Stateflow

A function that solves the power flow equations of an electrical power network

does have a solution.However, this function is limited to the analysis of P-Q buses only (representing either generators or loads). P-V buses cannot be modeled. In addition, voltage and current limits