Getting Started 

Explore wireless design examples, articles, and tutorials.

Massive MIMO and Beamforming

Introduction to Hybrid Beamforming
Introduction to Hybrid Beamforming
This example introduces the basic concept of hybrid beamforming and shows how to simulate such a system.

Channel Modeling and RF Propagation

SINR Map for a 5G Urban Macro-Cell Test Environment
SINR Map for a 5G Urban Macro-Cell Test Environment
Construct a 5G urban macro-cell test environment and visualize the signal-to-interference-plus-noise ratio (SINR) on a map. The test environment is based on the guidelines defined in Report ITU-R M.[IMT-2020.EVAL] for evaluating 5G radio technologies.

RF Transceivers

Build a cascade of RF components with RF Toolbox and analyze the link budget in terms of noise figure, gain, and IP3.
4:39
RF Budget Analysis with RF Toolbox
Build a cascade of RF components with RF Toolbox and analyze the link budget in terms of noise figure, gain, and IP3.

Antenna Modeling and Design

Design, analyze, and visualize antenna elements and antenna arrays using Antenna Toolbox.
2:13
Antenna Far-Field Visualization
Design, analyze, and visualize antenna elements and antenna arrays using Antenna Toolbox.

5G and LTE Mobile Communications Standards

Narrowband-IoT (NB-IoT) Downlink Waveform Generation
Narrowband-IoT (NB-IoT) Downlink Waveform Generation
This example shows how to generate LTE-Advanced Pro Release 13 Narrowband IoT (NB-IoT) waveforms for test and measurement applications

Note: These examples require 5G Toolbox or LTE Toolbox in addition to the products included in the wireless trial. 

WLAN and Connectivity Standards

802.11ax OFDMA and Multi-User MIMO Throughput Simulation
802.11ax OFDMA and Multi-User MIMO Throughput Simulation
This example shows the transmit and receive processing for an IEEE® 802.11ax™ multi-user downlink transmission over a TGax indoor fading channel.

Note: The 802.11 examples require WLAN Toolbox in addition to the products included in the wireless trial. 

Software-Defined Radio

LTE Transmitter Using Zynq-Based Software-Defined Radio (SDR)
LTE Transmitter Using Zynq-Based Software-Defined Radio (SDR)
This example shows how to use the Xilinx® Zynq-based radio support package with MATLAB and LTE Toolbox to generate an LTE transmission.

Note: These examples require LTE Toolbox and WLAN Toolbox in addition to the products included in the wireless trial.

Hardware Design and Verification

Building an LTE Compliant OFDM Modulator and Detector for HDL Implementation
Building an LTE Compliant OFDM Modulator and Detector for HDL Implementation
This example shows how to build an LTE compliant OFDM modulator and detector for implementation.

Note: These examples require LTE Toolbox, HDL Coder, HDL Verifier, and LTE HDL Toolbox in addition to the products included in the wireless trial. 

Deep Learning for Communications

Building an LTE Compliant OFDM Modulator and Detector for HDL Implementation
Building an LTE Compliant OFDM Modulator and Detector for HDL Implementation

Get a Free Trial

30 days of exploration at your fingertips.

Download now

Development of 5G Technology with MATLAB 

Download ebook