Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

By default, the genetic algorithm uses the Augmented Lagrangian Genetic Algorithm (ALGA) to solve nonlinear constraint problems without integer constraints. The optimization problem solved by the ALGA algorithm is

$$\underset{x}{\mathrm{min}}f(x)$$

such that

$$\begin{array}{c}{c}_{i}(x)\le 0,\text{\hspace{0.17em}}\text{\hspace{0.17em}}i=1\dots m\\ ce{q}_{i}(x)=0,\text{\hspace{0.17em}}\text{\hspace{0.17em}}\text{}i=m+1\dots mt\\ A\cdot x\le b\\ Aeq\cdot x=beq\\ lb\le x\le ub,\end{array}$$

where *c*(*x*) represents
the nonlinear inequality constraints, *ceq*(*x*)
represents the equality constraints, *m* is the number
of nonlinear inequality constraints, and *mt* is
the total number of nonlinear constraints.

The Augmented Lagrangian Genetic Algorithm (ALGA) attempts to solve a nonlinear optimization problem with nonlinear constraints, linear constraints, and bounds. In this approach, bounds and linear constraints are handled separately from nonlinear constraints. A subproblem is formulated by combining the fitness function and nonlinear constraint function using the Lagrangian and the penalty parameters. A sequence of such optimization problems are approximately minimized using the genetic algorithm such that the linear constraints and bounds are satisfied.

A subproblem formulation is defined as

$$\Theta (x,\lambda ,s,\rho )=f(x)-{\displaystyle \sum _{i=1}^{m}{\lambda}_{i}}{s}_{i}\mathrm{log}({s}_{i}-{c}_{i}(x))+{\displaystyle \sum _{i=m+1}^{mt}{\lambda}_{i}}ce{q}_{i}(x)+\frac{\rho}{2}{\displaystyle \sum _{i=m+1}^{mt}ce{q}_{i}}{(x)}^{2},$$

where

The components

*λ*of the vector_{i}*λ*are nonnegative and are known as Lagrange multiplier estimatesThe elements

*s*of the vector_{i}*s*are nonnegative shifts*ρ*is the positive penalty parameter.

The algorithm begins by using an initial value for
the penalty parameter (`InitialPenalty`

).

The genetic algorithm minimizes a sequence of subproblems, each
of which is an approximation of the original problem. Each subproblem
has a fixed value of *λ*, *s*,
and *ρ*. When the subproblem is minimized to
a required accuracy and satisfies feasibility conditions, the Lagrangian
estimates are updated. Otherwise, the penalty parameter is increased
by a penalty factor (`PenaltyFactor`

). This results
in a new subproblem formulation and minimization problem. These steps
are repeated until the stopping criteria are met.

Each subproblem solution represents one generation. The number of function evaluations per generation is therefore much higher when using nonlinear constraints than otherwise.

Choose the Augmented Lagrangian algorithm by setting the `NonlinearConstraintAlgorithm`

option
to `'auglag'`

using `optimoptions`

.

For a complete description of the algorithm, see the following references:

[1] Conn, A. R., N. I. M. Gould, and Ph. L.
Toint. “A Globally Convergent Augmented Lagrangian Algorithm
for Optimization with General Constraints and Simple Bounds,” *SIAM
Journal on Numerical Analysis*, Volume 28, Number 2, pages
545–572, 1991.

[2] Conn, A. R., N. I. M. Gould, and Ph. L.
Toint. “A Globally Convergent Augmented Lagrangian Barrier
Algorithm for Optimization with General Inequality Constraints and
Simple Bounds,” *Mathematics of Computation*,
Volume 66, Number 217, pages 261–288, 1997.

The penalty algorithm is similar to the Integer ga Algorithm. In its evaluation of the fitness of
an individual, `ga`

computes a penalty value as
follows:

If the individual is feasible, the penalty function is the fitness function.

If the individual is infeasible, the penalty function is the maximum fitness function among feasible members of the population, plus a sum of the constraint violations of the (infeasible) individual.

For details of the penalty function, see Deb [1].

Choose the penalty algorithm by setting the `NonlinearConstraintAlgorithm`

option
to `'penalty'`

using `optimoptions`

.
When you make this choice, `ga`

solves the constrained
optimization problem as follows.

`ga`

defaults to the`@gacreationnonlinearfeasible`

creation function. This function attempts to create a feasible population with respect to all constraints.`ga`

creates enough individuals to match the`PopulationSize`

option. For details, see Penalty Algorithm.`ga`

overrides your choice of selection function, and uses`@selectiontournament`

with two individuals per tournament.`ga`

proceeds according to How the Genetic Algorithm Works, using the penalty function as the fitness measure.

[1] Deb, Kalyanmoy. *An efficient
constraint handling method for genetic algorithms.* Computer
Methods in Applied Mechanics and Engineering, 186(2–4), pp.
311–338, 2000.