## Hyperspectral Data Correction

Hyperspectral sensors used for remote sensing applications acquire the spectral characteristics of the Earth's surface in many narrow and contiguous bands. When solar radiation is incident on a surface material, the material reflects the incident radiation. The amount of energy reflected signifies the spectral characteristics of the surface material.

The incident radiation reflected by the surface is known as the
*surface reflectance*. The reflected radiation measured
by the sensor positioned at the top of the atmosphere (TOA) is known as the TOA
radiance. Ideally, the TOA radiance is equal to the surface reflectance. But, in
real conditions, the incident and the reflected radiation are affected by
atmospheric phenomena such as scattering and absorption. As a result, the TOA
radiance value is the sum of reflections from the surface, reflections from
clouds, and scattering from air molecules and aerosol particles in the
atmosphere.

Along with the characteristics of the light source and the surface material, the
radiation values measured by the sensor are influenced by the sensor
*gain* and *bias* (offset) at each
spectral wavelength. The raw data recorded by the hyperspectral sensors is known as the
digital numbers (DNs). To use the hyperspectral data for quantitative analysis, you must
calibrate the data for TOA radiance values, and estimate the actual surface reflectance
values from the DNs.

The process of estimating TOA radiance values from the DNs is known as
*radiometric calibration*. The process of estimating the surface
reflectance values by removing the atmospheric effects is known as *atmospheric
correction*.

You can perform radiometric calibration and atmospheric correction procedures as preprocessing steps for thorough spectral analysis.

### Radiometric Calibration

**DN to TOA Radiance**

To estimate TOA radiance values from DNs, calibrate sensor gain and bias in each spectral band.

$${\text{RadianceL}}_{\lambda}=\text{\hspace{0.17em}}\text{\hspace{0.17em}}\left(DN\times Gain\right)+Bias$$

*Gain _{λ}* and

*Bias*are the gain and bias values for each spectral band (

_{λ}*λ*), respectively.

You can find the TOA radiance values for uncalibrated hyperspectral data by using
the `dn2radiance`

function. The function reads the gain and the bias
(offset) values for each spectral band from the header file associated with the
hyperspectral data.

**TOA Radiance to TOA Reflectance**

You can estimate the TOA reflectance values from TOA radiance values. TOA reflectance specifies the ratio of TOA radiance to the radiation incident on the surface.

$$\text{Reflectance}{\rho}_{\lambda}=\text{\hspace{0.17em}}\text{\hspace{0.17em}}\frac{\pi {d}^{2}{L}_{\lambda}}{ESU{N}_{\lambda}\text{\hspace{0.17em}}{\theta}_{E}}$$

*d* is the Earth-sun distance in astronomical units,
*ESUN _{λ}* is the mean solar irradiance
for each spectral band, and

*θ*is the sun elevation angle. You can estimate the TOA reflectance values from TOA radiance values by using the

_{E}`radiance2Reflectance`

function. **DN to TOA Reflectance**

You can directly compute TOA reflectance values from DNs, if the reflectance gain
(*R _{Gain}*) and reflectance offset
(

*R*) parameters of each spectral band are available.

_{Offset}$$\text{Reflectance}{\rho}_{\lambda}=\text{\hspace{0.17em}}\left(DN\times {R}_{Gain}\right)+{R}_{Offset}$$

The `dn2reflectance`

function calibrates the DNs to TOA reflectance values
by using the reflectance gain and offset parameters available in the
metadata.

### Atmospheric Correction

Atmospheric correction methods estimate the surface reflectance values from TOA radiance or TOA reflectance values. The atmospheric correction methods are classified as empirical methods and model-based methods.

*Empirical methods*are scene-based approaches that estimate relative surface reflectance values. Empirical methods are computationally efficient and does not require*a priori*measurements.*Model-based methods*are dependent on*in situ*atmospheric data and are useful for accurate estimation of surface reflectance values.

Method | Description |

`subtractDarkPixel` | Dark pixel subtraction or dark object subtraction, is an empirical method suitable for removing atmospheric haze from hyperspectral images. Atmospheric haze is characterized by high DN values, and results in unnatural brightening of the images. The dark pixels are minimum values pixels in each band. Dark pixels are assumed to have zero surface reflectance, and their values account for the additive effect of the atmospheric path radiance. |

`empiricalLine` | The empirical line calibration method assumes a linear
relationship between the surface reflectance and the
measured reflectance values. This method assumes that the
input hyperspectral data has one or more known target pixels
for which the surface reflectance values are available. The
calibration method consists of regressing the measured
spectral value of the target pixels against the You can use the empirical line calibration method if the data is acquired under uniform atmospheric conditions, and the measurements related to the target are time invariant. |

`flatField` | Flat field correction assumes that the surface being imaged includes a bright, uniform area that has neutral spectral reflectance. The mean spectrum of such an area includes the combined effects of solar irradiance, atmospheric scattering, and absorption. The relative surface reflectance values are estimated by dividing each pixel spectrum by the mean spectrum. |

`iarr` | Internal average relative reflectance (IARR) is an empirical approach that computes relative surface reflectance by normalizing each pixel spectrum with the mean spectrum. The method assumes that the surface is heterogeneous, and the spectral reflectance characteristics cancel out. As a result, the mean spectrum of the surface is similar to a flat field spectrum. This method is particularly helpful in estimating the relative surface reflectance values for regions without vegetation . |

`logResiduals` | Logarithmic residual correction of hyperspectral data is performed by dividing each pixel spectrum in the hyperspectral data by the spectral geometric mean and the spatial geometric mean. This method is an empirical approach that relies on the statistics of the acquired hyperspectral image. You can use this method to remove solar irradiance and atmospheric transmittance effects. |

`sharc` | The satellite hypercube atmospheric rapid correction (SHARC) method computes absolute surface reflectance values based on the analytical solutions of the radiative transfer equation. The surface reflectance values are computed by considering the adjacency effect for each point in the surface and the atmospheric effects. You can use this method if the atmospheric model parameters necessary to compute the accurate surface reflectance values are available. |

`fastInScene` | The fast in-scene method is an empirical approach which performs atmospheric correction based on in-scene characteristics. The method determines correction parameters directly from the pixel spectra of the acquired hyperspectral data. This method results in an approximate correction, but it is computationally faster than model-based methods. Use the fast in-scene method to correct atmospheric effects on hyperspectral data with diverse pixel spectra and sufficient number of dark pixels. The method estimates the baseline spectrum by using the dark pixels. |

`rrs` | Remote sensing reflectance (RRS) for correcting atmospheric effects from hyperspectral data containing large water bodies. RRS method estimates the water-leaving radiance and is the atmospheric correction method for hyperspectral ocean color data. |

`correctOOB` | Out-of-band correction method. This method removes out-of-band (OOB) effects from multispectral data by using the measured radiance and the sensor spectral response values. |