While Loop Plotting Single Point Values

hey guys, my code will only produce single points for the values in my while loop (see below for code) when I try to plot it. I'm not sure whats going on so any help would be much appreciated.

while(T9<148.5)

     disp('__________________________________________________________________'); 
     disp('Time Elapsed (In seconds):');

% Initializing Clock

% CTC Currenttimeclock CTC=CT*3600; disp(CTC);

%

      T1delt = 280;
      T2delt = ((T1 +T3 +(2*T5))/m) + (1-(4/m))*T2;
      T3delt = ((T2+T6+(n*Tf))*(2/m)) + ((1-(2/m)*(2+n))*T3);
      T4delt = 280;
      T5delt = ((T2+T4+T6+T8)/m) + ((1-(4/m))*T5);
      T6delt = ((2*T5+T3+T9+(2*n*Tf))/m) + (1-((4+2*n)/m))*T6;
      T7delt =  280;
      T8delt = ((T5+T7+T9+T12)/m) + ((1-(4/m))*T8);
      T9delt = ((T8+T13+(0.5*(T6+T10))+(n*Tf))*(4/(3*m))) + (1- (4/3)*((3+n)/m))*T9;
      T10delt= (T9+T14+(2*n*Tf))*(2/m) + (1 - ((4+4*n)/ m))*T10;
      T11delt= 280;
      T12delt= ((T8+T11+T13+T16)/m) + ((1-(4/m))*T12);
      T13delt= ((T9+T12+(0.5*(T14+T17))+(n*Tf))*(4/(3*m))) + (1- (4/3)*((3+n)/m))*T13;
      T14delt= (T10+T13+(2*n*Tf))*(2/m) + (1 - ((4+4*n)/ m))*T14;
      T15delt = 280;
      T16delt= ((T12+T15+T17+T20)/m) + ((1-(4/m))*T16);
      T17delt= ((T16+T21+(0.5*(T13+T18))+(n*Tf))*(4/(3*m))) + (1- (4/3)*((3+n)/m))*T17;
      T18delt= (T17+T22+(2*n*Tf))*(2/m) + (1 - ((4+4*n)/ m))*T18;
      T19delt = 280;
      T20delt= ((T19 +T21 +(2*T16))/m) + (1-(4/m))*T20;    
      T21delt= ((T20 +T22 +(2*T17))/m) + (1-(4/m))*T21;
      T22delt= ((T18+T21+(n*Tf))*(2/m)) + ((1-(2/m)*(2+n))*T22);

   x = [T99    T99    T10delt T14delt T18delt T22delt;
        T3delt T6delt T9delt  T13delt T17delt T21delt; 
        T2delt T5delt T8delt  T12delt T16delt T20delt;
        T1delt T4delt T7delt  T11delt T15delt T19delt];

    disp(x);

        T99 = 0;
        T1 = T1delt;
        T2 = T2delt;
        T3 = T3delt;
        T4 = T4delt;
        T5 = T5delt;
        T6 = T6delt;
        T7 = T7delt;
        T8 = T8delt;
        T9 = T9delt;
        T10= T10delt;
        T11= T11delt;
        T12= T12delt;
        T13= T13delt;
        T14= T14delt;
        T15= T15delt;
        T16= T16delt;
        T17= T17delt;
        T18= T18delt;
        T19= T19delt;
        T20= T20delt;
        T21= T21delt;
        T22= T22delt;

        %plot(CT, Esto);

        %CT is CurrentTime
        CT = (CT+deltaTime);
        hold on     
plot(CTC, T9delt);

end

Answer 1

[Rik]

If you have only single points, don't try to plot a line. You need to specify a format that plots points, like '.', '*' or 'd'. You can look at the other possibilities in the documentation for plot.

[Scott Benson]

thank you man