MATLAB Answers

madhan ravi
0

Why does gpuArray() error out?

Asked by madhan ravi
on 13 Aug 2019
Latest activity Commented on by madhan ravi
on 17 Aug 2019
What does the error mean?
>> A = gpuArray( rand(1024) );
There is a problem with the graphics driver or with this GPU
device. Be sure that you have a supported GPU and that the latest
driver is installed.
Caused by:
The CUDA driver could not be loaded. The library name used was
'/usr/local/cuda/lib/libcuda.dylib'. The error was:
dlopen(/usr/local/cuda/lib/libcuda.dylib, 10): image not found
>>

  2 Comments

I would reccomend updating/re-installing your graphics driver to see if that solves the problem.
madhan ravi
on 13 Aug 2019
Will do that and see if it works, thanks.

Sign in to comment.

Products


Release

R2018b

1 Answer

Answer by Joss Knight
on 13 Aug 2019

  13 Comments

madhan ravi
on 17 Aug 2019
No, as pasted in the comment above all I have is just Intel HD Graphics 4000. So no way to use GPU in MATLAB?
Note: eGPU on Mac only officially supports some AMD Radeon .
However: Your MacPro mid 2012 13" appears to be model MacBookPro9,2 with 1280 by 800 resolution internal. That model has two USB3.0 connectors, and a Firewire 800 connector, and a Thunderbolt 1 connector. You would therefore not be able to use any of the external GPUs that need Thunderbolt 3 connectors.
I happen to have the very next model up, the mid 2012 15.4 inch, which I took the upgraded display resolution on. It has a GeForce GT 650M as well as HD 4000. However, I effectively do not use that system now; the memory limitations (8 Gb) were getting tiresome, and the hard drive started to whine.
madhan ravi
on 17 Aug 2019
Thank you , sir Walter.

Sign in to comment.