What code to make figure window fullscreen with subplot?
Show older comments
Hello everyone,
I am not a huge matlab user, I know the basics but I don't use it that much.
I created a script that opens a .txt file containing datas from an experiment, reads it, extracts the informations needed, plots 3 curves in a unique figures and then saves the figure created as a .jpg. It works fine, except it saves the Figure (3 subplots) as it appears in the "reduced" window, and I want to save it as the fullscreen window. Basically what I want to do is to add a line of code right before I save the picture that will make the Figure window fullscreen.
I saw some solutions like:
set(B,'PaperPositionMode', 'auto')
set(B,'Units','Normalized','Outerposition',[0 0 1 1]);
that work for only one plot, but when I tried to use it for my 3 plots it ended up making the third set of datas take the whole screen. Basically all I could find on internet doesn't seem to work for subplots.
Here is my code, do you have any suggestions?
Many thanks
clear
close all;
filename='24-09-2019_14-20-2001Theo_sample_100x_diluted_MD_ladder_in_240_mM_trisches_buffer_30_cm_50_um_capillary_25kV.dat.asc';% Your file to be plotted
data0=dlmread(filename,'\t');%get info that are on the text file
totaldatapointsRFU=data0(9,2);%infos needed to plot the datas
totaldatapointskV=data0(9,3);
totaldatapointsA=data0(9,4);
samplerateRFU=data0(8,2);
sampleratekV=data0(8,3);
samplerateA=data0(8,4);
xaxismultiplierRFU=data0(12,2);
yaxismultiplierRFU=data0(13,2);
xaxismultiplierkV=data0(12,3);
yaxismultiplierkV=data0(13,3);
xaxismultiplierA=data0(12,4);
yaxismultiplierA=data0(13,4);
dataRFU=data0(14:(13+totaldatapointsRFU),1)*yaxismultiplierRFU;%First set of datas located in the .txt file
timeRFU=linspace(0,totaldatapointsRFU/samplerateRFU,totaldatapointsRFU);%Time vector for the first datas
datakV=data0((14+totaldatapointsRFU):(13+totaldatapointsRFU+totaldatapointskV),1)*yaxismultiplierkV;%Second set of datas
timekV=linspace(0,totaldatapointskV/sampleratekV,totaldatapointskV);
dataA=data0((14+totaldatapointsRFU+totaldatapointskV):(13+totaldatapointsRFU+totaldatapointskV+totaldatapointsA),1)*yaxismultiplierA;%Thrid set of datas
timeA=linspace(0,totaldatapointsA/samplerateA,totaldatapointsA);
subplot(2,2,1)% Plot of the first set of datas
A=plot(timekV/60,datakV,'LineWidth',3);
xlabel('Time in minutes','FontSize',20,'FontWeight','bold','Color','k')%First argument is the x-axis name
xlim([0 1.1*max(timekV)/60])
ylabel('Tension in kV','FontSize',20,'FontWeight','bold','Color','k')%First argument is the y-axis name
ylim([1.1*min(datakV) 1.1*max(datakV)])
%set(A,'PaperPositionMode', 'auto')
%set(A,'Units','Normalized','Outerposition',[0 0 1 1]);
subplot(2,2,2)% Plot of the second set of datas
B=plot(timeA/60,dataA,'LineWidth',3);
xlabel('Time in minutes','FontSize',20,'FontWeight','bold','Color','k')%First argument is the x-axis name
xlim([0 1.1*max(timeA)/60])
ylabel('Current in µA','FontSize',20,'FontWeight','bold','Color','k')%First argument is the y-axis name
ylim([1.1*min(dataA) 1.1*max(dataA)])
%set(B,'PaperPositionMode', 'auto')
%set(B,'Units','Normalized','Outerposition',[0 0 1 1]);
subplot(2,2,[3,4]) %plot of the third set of datas
C=plot(timeRFU/60, dataRFU, 'LineWidth', 3);
xlabel('Time in minutes','FontSize',20,'FontWeight','bold','Color','k')%First argument is the x-axis name
xlim([0 1.1*max(timeRFU)/60])
ylabel('RFU','FontSize',20,'FontWeight','bold','Color','k')%First argument is the y-axis name
ylim([1.1*min(dataRFU) 1.1*max(dataRFU)])
%set(C,'Units','Normalized','Outerposition',[0 0 1 1]);
%set(C,'PaperPositionMode', 'auto')
set(gca,'FontSize',20)
%set(gca,'Units','Normalized','Outerposition',[0 0 1 1]);
title('100x diluted MD ladder in 25 mM LiAc buffer, 30 cm 50 µm capillary','FontSize',20,'FontWeight','bold','Color','k')%First argument is the title
filename1=erase(filename,'.dat.asc');%Saves the plot in a file with the same name but as a JPG
saveas(gcf,[filename1 '.jpg'])
2 Comments
Rik
on 25 Sep 2019
So you want to maximize the figure before making the image?
Théo Liénard--Mayor
on 25 Sep 2019
Accepted Answer
Rik
on 25 Sep 2019
You can use my maximize FEX submission, and/or if you're using R2018a or later you can set the WindowState property (see the documentation for all the options: link).
set(gcf,'WindowState','maximized')
3 Comments
Théo Liénard--Mayor
on 30 Sep 2019
Thank you, your maximize function works, altough I am not getting exactly the same thing in my file and in my Octave display. This is what Im getting in my Octave display (just with the code, no modifiction with the mouse.)
And this is what I'm getting in my .jpg file
I don't really understand why I have this difference, in my opinion the figures are more beautiful in the first case, but the second case will do for now.
Anyway, thank you for your help!
Théo Liénard--Mayor
on 30 Sep 2019
Rik
on 30 Sep 2019
If I recall correctly I just made the font size smaller until the output matched what I needed when I ran into this issue with Octave. The renderer is not super well-documented in Matlab, but for Octave on Windows it's even worse. If you can get Java to work reasonably well, you can use the FEX submission by Yair Altman to get a capture of your screen, instead of relying on a re-rendered output.
More Answers (1)
Bruno Luong
on 25 Sep 2019
Edited: Bruno Luong
on 25 Sep 2019
1 vote
Check out This thread hope it's not obsolete. If you run on Windows WindowAPI (Jan's reply) is the only one which makes real full-screen display (no border...)
2 Comments
Théo Liénard--Mayor
on 30 Sep 2019
Bruno Luong
on 30 Sep 2019
Here is the image I get win WinAPI (I have an old version, syntax might varies)
close all
plot(rand(1,100))
WindowAPI(get(gcf,'Number'),'Position','full')
saveas(gcf,'fullscreentest.jpg')
Categories
Find more on Subplots in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
