C Data and Function Interfaces

Map model data elements and functions to model-independent code definitions

To comply with code standards and guidelines, integrate generated code with external code, and address memory requirements, configure the representation of model data elements and entry-point functions for code generation. You configure model data elements and functions by mapping them to code definitions that are predefined by the product or created with the Embedded Coder Dictionary. For data elements, you also have the option of mapping them to code definitions created in packages with the Custom Storage Class Designer.

For an introduction, see C Code Generation Configuration for Model Interface Elements.

Tools

Code Mappings Editor – C

Associate model elements with code interface definitions

Objects

`coder.mapping.api.CodeMapping`	Model data and function interface configuration for C code generation
`coder.mapping.api.CoderDictionary`	Query and set the code settings of dictionary defaults in an Embedded Coder dictionary within a Simulink data dictionary

Functions

expand all

Generated Entry Points

`model_initialize`	Generated C/C++ entry-point function that contains initialization code for a Simulink model
`model_reset`	Generated C/C++ entry-point function that contains reset code for a Simulink model
`model_step`	Generated C/C++ entry-point function that contains execution code for each step in a Simulink model
`model_terminate`	Generated C/C++ entry-point function that contains termination code for a Simulink model

Model Element Configuration for C Code Generation

Create and Find Code Mappings

`coder.mapping.api.get`	Get code mappings for model
`coder.mapping.utils.create`	Create code mappings object for configuring data and function interface for C and C++ code generation
`find`	Get model elements for the category of model code mappings

Default Configurations

`getDataDefault`	Get default storage class or storage class property setting for model data category
`getFunctionDefault`	Get default function customization template or memory section for model functions category
`setDataDefault`	Set default storage class and storage class property values for model data category
`setFunctionDefault`	Set default function customization template and memory section for model functions category

Function Configuration

`getFunction`	Get code configuration from code mappings for model function
`setFunction`	Set code mapping information for model function

Root-Level Inport and Outport Configuration

`getInport`	Get code and calibration configuration from code mappings for root-level inport
`getOutport`	Get code and calibration configuration from code mappings for root-level outport
`getDeploymentType`	Get deployment type of model
`setInport`	Configure root-level inports for code and calibration file (a2l) generation
`setOutport`	Configure root-level outport for code and calibration file (a2l) generation
`setDeploymentType`	Set deployment type of model

Parameter Configuration

`getModelParameter`	Get code and calibration configuration from code mappings for model parameters
`setModelParameter`	Configure model parameter for code and calibration file (a2l) generation

Signal, State, and Data Store Configuration

`addSignal`	Add block output signal to model code mappings
`getDataStore`	Get code and calibration configuration from code mappings for local or shared local data store
`getSignal`	Get code and calibration configuration from code mappings for block output signal
`getState`	Get code and calibration configuration from code mappings for block state
`removeSignal`	Remove block output signal from model code mappings
`setDataStore`	Configure local or shared local data store for code and calibration file (a2l) generation
`setSignal`	Configure block signal data for code and calibration file (a2l) generation
`setState`	Configure block states for code and calibration file (a2l) generation

Coder Dictionary Configuration

`setDataDefault`	Set default code settings for data category
`getDataDefault`	Get default code settings for data category
`setFunctionDefault`	Set default function customization template and memory section for model functions category
`getFunctionDefault`	Get default function customization template or memory section for model functions category

Topics

Configuration Fundamentals

C Code Generation Configuration for Model Interface Elements
Control the representation of model data elements and functions in generated C code.
Code Definition and Mapping Limitations and Considerations
Restrictions, constraints, and considerations that apply to code definitions and code mappings.
Configure Default C Code Generation for Categories of Data Elements and Functions
Apply default code generation configurations for categories of model data and functions across a model.
Manage Multiple Code Mappings for a Model
Design models that are platform-neutral and ready to deploy to different run-time environments.
Protect Global Data with const and volatile Type Qualifiers
Prevent data corruption and improve code safety by applying C type qualifiers const and volatile to global data in generated code.
How Generated Code Exchanges Data with an Environment
The generated code exchanges signal, state, and parameter data with the calling environment through a data interface.
Configure Generated Code According to Interface Control Document Specifications
Configure code generation settings for a model according to specifications from an interface control document.
Migration of Model Data Configurations to Code Mappings
How Simulink^® migrates code definitions for models created before release R2020b to code mappings and related information to consider.
Migration of Memory Section and Shared Utility Settings from Configuration Parameters to Code Mappings
For models created before release R2018a, how Simulink migrates memory section and shared utility function configuration parameter settings to model code mappings.

C Data Configuration

Choose Data Configuration Approach
Make decisions about the design data used by your model based on your code generation requirements.
Configure Root-Level Inport Blocks for C Code Generation
Set the storage class and other relevant code generation properties for root-level Inport blocks.
Configure Root-Level Outport Blocks for C Code Generation
Set the storage class and other relevant code generation properties for root-level Outport blocks.
Configure Signal Data for C Code Generation
Set the storage class and other relevant code generation properties for signal data.
Configure Parameters for C Code Generation
Set the storage class and other relevant code generation properties for parameters.
Configure Block States for C Code Generation
Set the storage class and other relevant code generation properties for block states.
Configure Data Stores for C Code Generation
Set the storage class and other relevant code generation properties for data stores.
Choose Storage Class for Controlling Data Representation in Generated Code
Choose a storage class to apply to data elements in a model, such as signals, states, and block parameters.
Control Placement of Global Data Definitions and Declarations in Generated Files
Modularize the generated code and establish clear ownership of global data by controlling the file placement of each declaration and definition.
Design Data Interface by Configuring Inport and Outport Blocks
Customize the data interface of a model to enable integration of the generated code with your own code and to improve code traceability and readability.

C Function Configuration

Configure Generated C Function Interface for Model Entry-Point Functions
Learn about generated C entry-point functions, configuration options, and how to interface with them.
Control Data and Function Interface in Generated Code
Control how generated code exchanges data with a calling environment.
Configure Entry-Point Function Interfaces for Simulink Function and Function Caller Blocks
Customize entry-point function names and step function arguments for Simulink Function and Function Caller blocks.
Generate Modular Function Code for Nonvirtual Subsystems
Generate modular function code for nonvirtual subsystems.
Rapid Prototyping Model Functions
Generate rapid prototyping code.

Data Access and Initialization

Create Tunable Calibration Parameter in the Generated Code
In the generated code, create tunable parameter data that you can access during rapid prototyping and calibration.
Reuse Parameter Data in Different Data Type Contexts
Reuse parameter data by creating a Simulink.Parameter object or numeric MATLAB^® variable that you can use in different data type contexts.
Limitations for Block Parameter Tunability in Generated Code
Limitations can prevent a block parameter from appearing in the generated code as tunable, which means you cannot interact with the parameter value after compiling the code.
Access Signal, State, and Parameter Data During Execution
As you iteratively develop a model, capture output signal and state data that model execution generates. Tune parameter values during execution to observe results on the outputs.
Switch Between Sets of Parameter Values During Simulation and Code Execution
Switch between independent sets of values for the same block parameters by storing the sets in an array of structures.
Preserve Variables in Generated Code
As you iteratively develop a model, you can tune block parameter values during simulation or execution of generated code to observe the results on signal and state values.
Configure Packaging of Parameter Arguments in Generated Code
Customize the implementation of parameter arguments in generated code.
Control Signal and State Initialization in the Generated Code
Generate code that enables you to store tunable initial conditions in memory, for example, for modeling a system that shuts down and restarts.
Initialization of Signal, State, and Parameter Data in the Generated Code
To match the numerics of a simulation in Simulink, the generated code assigns initial values to global data, especially for block states and parameters.
Compile Code Conditionally for All Values of Variant Parameters with Same and Different Dimensions
This example shows how to generate a C code that contains all the active and inactive values of variant parameters.

Related Information

Generated Code Interfacing

Featured Examples

Configure Model Data Interface for C Code Generation

Configure data elements in a model, such as block parameters and signal lines, so that corresponding variables appear in generated code.

Open Live Script

Generate Reentrant, Multi-Instance Code

Configure a model for reentrant, multi-instance code generation. Multiple programs can use reentrant code simultaneously. When you configure a model for reentrancy, the execution (step) entry-point function uses root-level input and output arguments instead of global data structures. After examining the configuration settings, generate and review the generated code.

Open Script