Main Content

Simulink.sdi.getNumCursors

Check number of cursors active in the Simulation Data Inspector

    Description

    example

    num = Simulink.sdi.getNumCursors returns the number of active cursors in the Inspect pane of the Simulation Data Inspector.

    num = Simulink.sdi.getNumCursors(view) returns the number of active cursors in the Inspect or Compare pane of the Simulation Data Inspector, as specified by view.

    Examples

    collapse all

    You can use the Simulation Data Inspector programmatic interface to specify the position of cursors on time plots or sparklines and to access the time that corresponds to the current cursor position.

    Open the session file vdp_mu.mldatx to add and plot data in the Simulation Data Inspector. The session file contains data for a 20-second simulation of a model of the Van Der Pol equation, with signals x1 and x2 plotted on separate subplots in a 2-by-1 subplot layout.

    open vdp_mu.mldatx;

    Use the Simulink.sdi.setNumCursors function to add one cursor to the plot.

    Simulink.sdi.setNumCursors(1);

    Suppose you want to know the signal values 5 seconds into the simulation. Use the Simulink.sdi.setCursorPositions function to move the cursor to t=5s and read the signal values off from the cursor on each subplot. The asterisk next to the value in the cursor label indicates that the value is interpolated because the simulation did not include a calculation for a simulation time of exactly 5s.

    Simulink.sdi.setCursorPositions('left',5);

    Suppose you want to calculate the time between two peaks in the x2 signal. Add a second cursor using the Simulink.sdi.setNumCursors function or using the Show/hide data cursors button in the Simulation Data Inspector.

    numCursors = Simulink.sdi.getNumCursors;
    if(numCursors < 2)
        Simulink.sdi.setNumCursors(2);
    end

    Drag the cursors so the left cursor is positioned at the first peak in the x2 signal and the right cursor is positioned at the second peak. Alternatively, run this code that positions the cursors for you.

    Simulink.sdi.setCursorPositions('left',5.921998549931304,'right',12.378442136906246);

    The Simulation Data Inspector displays the difference between the two cursors in seconds. However, the cursor position and difference values are both rounded. Use the Simulink.sdi.getCursorPositions function to programmatically retrieve the exact time values that correspond to the cursor positions. Then, compute the difference between the times.

    [t1,t2] = Simulink.sdi.getCursorPositions;
    T = t2 - t1
    T = NaN
    

    Input Arguments

    collapse all

    Plot area for which to return number of active cursors, specified as 'inspect' or 'compare'.

    Data Types: char | string

    Output Arguments

    collapse all

    Number of active cursors, returned as 0, 1, or 2.

    Introduced in R2021a