hello i'm working on simulation using simulink which is my title is ENHANCING BATTERYENERGY STORAGE SYSTEMSTHROUGH MODULAR MULTILEVEL CONVERTER WITH STATE-OF-CHARGE BALANCING CONTROL. i already build 9 level mmc. but i dont have any idea for state of charge balancing control.please any suggestion and explain.
1 Comment
Time Descending
To implement SOC balancing control for your MMC in Simulink:Steps
- Initialize:
- Set initial SOC levels for battery modules.
- Configure your 9-level MMC in Simulink.
- Monitor SOC:
- Use Simulink blocks to monitor SOC of each module.
- Control Algorithm:
- Implement a PI controller to adjust power flow based on SOC differences.
- Balancing Strategy:
- Active Balancing: Use DC-DC converters to transfer energy between modules.
- Passive Balancing: Use resistors to dissipate excess energy.
- Simulink Implementation:
- Integrate the control logic and balancing components into your Simulink model.
- Simulate and Validate:
- Run the simulation, adjust parameters, and ensure SOC levels are balanced.
Example Pseudo-code
matlab
Copy code
for each time step:
SOC = measureSOC();
SOC_diff = target_SOC - SOC;
control_signal = PI_controller(SOC_diff);
adjustPowerFlow(control_signal);
SOC = updateSOC();
end
References
- Research SOC balancing in MMCs and battery systems.
- Use Simulink documentation and examples for guidance.
- Study BMS design for additional insights.
Sign in to participate
