Custom Reference Design, Part 3: Registering with MATLAB

Deploying your design to an FPGA requires mapping the inputs and outputs of your design to FPGA pins, AXI registers, or other FPGA blocks. To deploy your design to a custom reference design, register the reference design with MATLAB®. HDL Coder™ can then use the reference design registered in MATLAB for targeting. You’ll learn:

  • What MATLAB files you need to create
  • What information must be provided in these MATLAB files
  • What you need to do to make sure that the files are available on the MATLAB search path

Published: 4 May 2018

Related Products

Feedback

Up Next:

This is part two of a two-part series on this feature, showing how to use clock rate pipelining with other HDL Coder optimizations to trade off speed versus resource usage.

HDL Coder Clock Rate Pipelining, Part 2: Optimization

Related Videos:

Clock rate pipelining, introduced in HDL Coder R2014b, inserts new pipeline stages that are clocked at the faster FPGA clock rate. This is part one of a two-part series on this feature, introducing the feature and basic concepts.

HDL Coder Clock Rate Pipelining, Part 1: Introduction

This hands-on, two-day course focuses on developing and configuring models in Simulink and deploying on Xilinx Zynq -7000 All Programmable SoCs.

Course Preview: Programming Xilinx Zynq SoCs with MATLAB...

I recently was asked how to import from Excel but only bring in a certain part of the file. You might want to do this if you have headers or just want a small part of the spreadsheet to come into MATLAB. In this video we see how easy it is to generat

Easy Custom Excel Import to MATLAB

Knowing how to use callbacks in MATLAB allows you to customize your graphics and make them more interactive. This short video shows you how to highlight a line in MATLAB by clicking on it.

Custom Interactive Graphics in MATLAB

View more related videos