This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

RF Network Construction

Create RF circuits for frequency domain analysis

Use these RF Toolbox™ circuit objects and functions such as capacitor , inductor, and resistor to create arbitrary networks and calculate the S-parameters and group delay.

Alternatively, use the RFCKT objects and functions to define RF network components and connect them in series, parallel, cascade, hybrid, and inverse hybrid configurations. Then you can use these networks to perform additional RF analysis.

Objects

expand all

amplifierAmplifier object
resistorResistor object
capacitorCapacitor object
inductorInductor object
lcladderLC ladder object
nportCreate linear n-port circuit element
circuitCircuit object
modulatorModulator object
rfelementGeneric RF element object
rffilterCreate RF filter object
rfckt.amplifierRF Amplifier
rfckt.cascadeCascaded network
rfckt.coaxialCoaxial transmission line
rfckt.cpwCoplanar waveguide transmission line
rfckt.datafileComponent or network from file data
rfckt.delayDelay line
rfckt.hybridHybrid connected network
rfckt.hybridgInverse hybrid connected network
rfckt.mixer2-port representation of RF mixer and its local oscillator
rfckt.passivePassive component or network
rfckt.microstripMicrostrip transmission line
rfckt.parallelParallel connected network
rfckt.parallelplateParallel-plate transmission line
rfckt.rlcglinePassive component or network
rfckt.seriesSeries connected network
rfckt.seriesrlcSeries RLC component
rfckt.shuntrlcShunt RLC component
rfckt.twowireTwo-wire transmission line
rfckt.txlineGeneral transmission line

Functions

expand all

sparametersS-parameter object
groupdelayGroup delay of s-parameter object or RF filter object or RF Toolbox circuit object
copyCopy circuit or data object
cascadesparamsCombine S-parameters to form cascaded network
addInsert circuit element or circuit object into circuit
setportsSet ports of circuit object
setterminalsSet terminals of circuit object
cloneCreate copy of existing circuit element or circuit object
rationalfitPerform rationalfit on an S-parameters object
analyzeAnalyze RFCKT object in frequency domain
calculateCalculate specified parameters for rfckt objects or rfdata objects
circleDraw circles on Smith Chart
extractExtract specified network parameters from rfckt object or data object
listformatList valid formats for specified circuit object parameter
listparamList valid parameters for specified circuit object
loglogPlot specified circuit object parameters using log-log scale
plotPlot specified circuit object parameters on X-Y plane
plotyyPlot specified parameters on X-Y plane with Y-axes on both left and right sides
getopDisplay operating conditions
polarPlot specified object parameters on polar coordinates
semilogxPlot specified circuit object parameters using log scale for x-axis
semilogyPlot specified circuit object parameters using log scale for y-axis
smithPlot specified circuit object parameters on Smith chart
writeWrite RF data from circuit or data object to file
getz0Get characteristic impedance of transmission line object
readRead RF data from file to new or existing circuit or data object
restoreRestore data to original frequencies
setopSet operating conditions
groupdelayGroup delay of s-parameter object or RF filter object or RF Toolbox circuit object

Topics

Specify Operating Conditions

Explains how to set and retrieve operating condition values.

Manage Circuits and Sessions

Describes the RF Design and Analysis app circuit and session operations.

Model an RF Network

Describes how to build and analyze an RF network and export the network to the MATLAB® workspace.

Analyze Circuits

Describes setting parameters for circuit analysis and perform the analysis.

Featured Examples