IP Core Generation with MATLAB and Simulink

Generate an IP core from MATLAB and Simulink

A semiconductor intellectual property core – often referred to as an IP core – is a reusable HDL component for an FPGA, SoC FPGA, or ASIC design.

IP core generation using an AXI4 interface to write data to an IP core on target hardware. (See details for Intel and Xilinx)


In FPGAs and SoC FPGAs, IP cores act as building blocks that you can integrate into complete implementations using design tools such as Vivado® IP Integrator and ISE from Xilinx or Qsys from Intel. The AMBA® AXI version 4 AXI interconnect protocol – better known as AXI4 – has emerged as a standard protocol for memory-mapped and streaming data transfer.

Common workflows for IP core generation produce IP cores that comply with the AXI4 interface supported by Xilinx and Intel and also the AXI4-Lite and AXI4-Stream protocols for Xilinx® devices. You can integrate these custom IP cores into FPGA or SoC FPGA designs with Xilinx Vivado IP Integrator or with Qsys from Intel.

You can do IP core generation from MATLAB® code or Simulink® models. You can also use the IP core generation workflow in HDL Coder™ with the C/C++ code generation features in Embedded Coder® in an automated hardware-software workflow that targets Xilinx Zynq® SoCs and Intel® SoC FPGAs.

For additional details, see HDL Coder™.

Software Reference

See also: Simulink, MATLAB, FPGA design and SoC codesign, Embedded Coder, HDL Coder, motor control design with Simulink, Xilinx Zynq support from Simulink, Intel SoC FPGA support from HDL Coder